We are renowned manufacturer, trader, importer and exporter of Industrial R.O. System-250-Lph. These systems are widely used in colleges, schools and offices for water purification. Offered systems are renowned for their zero leakage and attractive look, less noise, easy maintenance, easy installation and durability. These systems are manufactured as per the set industry norms to maintain their wider application area. Valued patrons can avail Industrial R.O. System-250-Lph from us at most affordable prices.
Our R. O. Systems provides purest drinking water to you, to your employees and your valuable customers. Plants are economical designed to give the output of pure drinking water @ 10 paisa per liter which helps you to increase your customer list as well as can make delicious food.
All our various R. O. Systems are designed & manufactured in such a way that, the plant causes no leakage, less noise, attractive in look. Also having softener, Antiscalant, pH correction, Chlorination & De-chlorination, Iron removal & other Dosing systems. Built with a good quality material.
- Drinking Water
- Beverage/ Bottled Water
- Cooling Tower Water
- Boiler Feed
- Chemical Blending
- Component Rinse Water
- Food Processing
- Consumer Products
- Cosmetic Veterinary
- Waste water Re-use, and many other applications.
Reverse Osmosis systems in their basic form consist of a pressure pump and a high pressure housing containing a semi-permeable membrane. Water is forced into the housing under pressure and pure water or permeate is collected from an outlet and passed to service. Rejected water, or concentrate, is collected from another outlet and routed to drain to prevent a build up of salts on the membrane itself. In order to keep the amount of water to a minimum, a proportion of the concentrated water is recycled back to the inlet of the pump.
The proportion of pure water produced from the feed is known as the recovery rate, and will vary from 15 to 85% depending upon the type of water being treated. Typically, with UK mains water, a recovery rate of 66-75% can be achieved. As water should be softened and dechlorinated before being passed to the membrane, the reject water (which is still soft) can be used for any application where soft water is required such as wash water, grey water for toilet flush, or in some cases cooling tower make up.
The rejection rate of contaminants from the water is generally in the region of 90 to 99.5% depending upon the type of membrane used and water to be treated. This means that a typical mains water supply of around 1000 TDS, when passed through a Reverse Osmosis plant will give water of 100 to 250 TDS. Greater purity can be achieved with a final "polishing" of the water if required.
Output range from 1.2 m3/day to 3.6m3/day
Continuous conductivity monitoring and readout
Stainless steel single/three phase high pressure pump
High and low pressure gauges
Permeate, recirculation and concentrate flow gauges
High Recovery in standard configuration
Rugged powder coated welded steel frame
Compact size with minimum footprint
All units are single pass, series array
Microprocessor controller if required
Low pressure switches
High pressure switches
Low water level alarm/start-up